Eggtimer Rocketry Flight Computer Manual do Utilizador descarregar pdf (Página 10)

__ 11 10K ohm 0805 SMT resistors (marked “103”)

__ 1 22K ohm 0805 SMT resistor (marked “223”)

__ 4 .1 uF 0805 SMT multilayer ceramic capacitors (marked “104”)

__ 1 10 uF electrolytic capacitor

__ 1 6mm x 3mm push button switch

__ 1 10mm magnetic buzzer

__ 1 3-pin header

__ 1 1/32” Brass Antenna Wire (4”)

__ 1 3 ½” length of 1/16” heat-shrink tubing

__ 1 Coil of .020” 63/37 No-Clean solder wire

Note that you will find that you got a few more 0805-size components that you actually need.

This is intentional… in case you drop one. Those buggers are small, and REALLY easy to

lose if you’re not careful. Therefore, DO NOT remove them from the tape that they come in

until you’re ready to install it. Remove one part at a time, solder it in, then go onto the next

one. If you try to remove them all at the same time, you will get them mixed up, or lost.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Sem comentários

Eggtimer Rocketry Flight Computer Manual do Utilizador Página 10